Changzhou Junhe Technology Stock Co.,Ltd
Changzhou Junhe Technology Stock Co.,Ltd is a high-tech enterprise devoted to developing industrial fine chemicals,special equipment and services solution provider which was founded in Changzhou
Add to Cart
Machine Tools Synthetic Cutting Fluid / Anti Wear Metal Cutting Lubricant
Synthetic Cutting Fluid brief
Synthetic Cutting Fluid is general type microemulsion cutting fluid,consist of lubricating oil,EP anti-wear agent, anti-rust agent and other additives. Suitable for processing cast iron, carbon steel, alloy steel, copper alloy, aluminum alloy, etc.and is widely used in all kinds of machine tools, machining center of cutting, grinding process. Liquid supply for single machine and concentrated supply for central cooling system
Synthetic Cutting Fluid features:
1, Excellent lubrication,cooling,cleaning and anti-rust performace
2, Products can improve the surface finish of workpiece, ensure the workpiece and machine tool online antirust requirements
3, Good corrosion resistance, foam inhibiting and emulsion stability of long service life, reduce maintenance costs
Synthetic Cutting Fluid Technical parameters
| Item | Quality index | Test method | ||||
| 15~35℃ Original solution appearance | Red brown oil liquid | GB/T6144 5.2 | ||||
| Diluent(5%) | Phase state |
Clear to microemulsion | Visual | |||
| pH | 9.0～10.0 | GB/T 6144 5.5 | ||||
|
Stability (15~35℃, 24h) | Soap | no | SH/T0365 appendixA | |||
| Oil | no | |||||
| (15~35℃, 4h) Salt allowance | No phase separation | SH/T0365 appendixC | ||||
| mL/10min Defoaming ability | ≤2 | GB/T6144 5.6 | ||||
| 55±2℃ Corrosion test,full immersion | First grade grey casting iron | 24h | GB/T6144 5.8 | |||
| Aluminum | 8h | |||||
| Red copper | 8h | |||||
| H62, Brass | 8h | |||||
| 35±2℃ Anti-rust test | First grade grey casting iron | Single piece | 24h | GB/T6144 5.9 | ||
| Lamination | 8h | |||||
Synthetic Cutting Fluid Instructions:
1, Recommended concentration:cutting:1:10~1:20; grinding: 1:20~1:25,Use concentration can be adjusted according to processing requirements
2, Use (change)of new fluid method: before using the new liquid,clean the storage tank and piping circulation(with concentration diluent and adding bactericide 0.3 ~ 0.5%),at last add the productt evenly circulation can be used
3, Tank liquid supply or maintenance: when need supply tank need supply,should add water with corresponding percentage of original solution
Synthetic Cutting Fluid Other matters:
1, Package:25kg/plastic drum,200kg/plastic drum,1000kg/plastic drum
2, Shelf life:two years
