Changzhou Junhe Technology Stock Co.,Ltd
Changzhou Junhe Technology Stock Co.,Ltd is a high-tech enterprise devoted to developing industrial fine chemicals,special equipment and services solution provider which was founded in Changzhou
Add to Cart
DSP T400 Suitable for any kinds of zinc flake paints and related top coat, seal, coating.
Equipment main body:
1. Weighing loading system.
2. Dip-spin coating system.
3. Conveyor distributor.
4. Operation control system.
Features:
Basket planet type configuration, every time convert direction can realize the workpiece location swap, the qualified rate of blind hole workpieces is very high, full automatic design, efficient and energy saving.
Main parameter:
| Main Parameter: | ||||||
| Centrifugal Motor Power: | 7.5kw | |||||
| Installed Capacity: | 28 KVA | |||||
| Max Loading: | 160kg (Including the Basket ) | |||||
| Max Centrifugal Speed: | 320r/min | |||||
| Min Centrifugal Speed: | 5r/min | |||||
| Tilting Obliquity: | 75° | |||||
| Centrifugal Speed/Tilting: | 10~40r/min | |||||
| 1.1 | Rail Transfer and unloading Unit | |||||
| Max Transfer Weight: | 160kg (Including the Basket ) | |||||
| Transfer route: | 1450mm | |||||
| Unloading Max Angle of Rolling: | 180° | |||||
| 1.2 | Hydraulic & Oil Press Supply Unit | |||||
| Function: | Supplying hydraulic power to the coating machine | |||||
| Max Pressure Supply: | 5MPa | |||||
| Max Working Flow: | 24L/Min | |||||
| 1.3 | Controlling & Operating System | |||||
| Data/Processing Storage: | 2M (5000 ~8000pcs coating processes can be stored) | |||||
| Operation Panel: | Touch Screen | |||||
| Language: | English & chinese Language | |||||
| 1.4 | Basket | |||||
| Function: | Loading workpieces for dipping & spinning | |||||
| Diameter of Basket: | Φ800 mm*500 mm | |||||
| Lated Loading: | 120kg (Max) | |||||
| Weight: | 48kg | |||||
| 1.5 | Dip / Pumping Barrel with Cooling jecket | |||||
| Function: | Stirring & filtering to keep the solution in good working condition. | |||||
| Max Loading: | 360 L | |||||
| It can be linked with a chiller. | ||||||
| 1.6 | Dip Barrel Lifting Platform Unit | |||||
| Function: | Lifting the Dip/pumping Barrel to the dipping position | |||||
| Lated lifting capacity: | 850kg | |||||
| Lated height of lifting: | 1000mm | |||||
| 1.7 | Lift-weight-loading Unit | |||||
| Function: | Lift and load the workpieces into the basket , according to the pre-setting weight data. | |||||
| Power: | 1.5kw | |||||
| Max Lifting: | 500kg | |||||
| 1.8 | Linking Conveyor Feeder | |||||
| Function: | Spreading and forwarding the workpieces onto the mesh belt of the furnace | |||||
| Power: | 0.75kw | |||||
| Effective Width of Mesh Belt: | 800mm | |||||
| Forwarding method: | Program-controlled Receiving parts from the coater with high speed and unloading the parts onto the belt of furnace with low speed | |||||
| Woking Conditions of the LINE | ||||||
| Woking Site | Inside ( Free from corrosion and combustible gas | |||||
| Ambient Tempreture | 5-40℃ (For the LINE only . Please contack your supplier for solution. | |||||
| Ambient Humidity | 35%RH-85%RH (For the LINE only . Please contack your supplier for solution . | |||||
| Power | AC 380V±10%,50HZ±1%, 3 phases 5 wires | |||||
| Compressed Air | 3 m3/min, Pressure≥6.5-7Kgf/cm2, Oleaginousness ≤0.1PPM, | |||||
| Water | Pressure ≥2-4 Kgf/cm2 | |||||
Suitable workpiece : small hex socket, torx head bolt, inner hexagon bolt, outer hexagon bolt,
stamping parts which suitable for dip spin coating.
Minimum Order Quantity: 1 Set
Packaging Details: 20 GP
Delivery Time: Three months after receipt of advance payment
Supply Ability: 1 Set per Month
Color:Red & Gray
Max Load Of Basket: 30kg
Max Spinning Speed:0-300r/min
Shortest Production Rate: 120s
Max Capacity: 2000kg/h
Suitable Workpiece Weight: ≤500g
Suitable Workpiece Length: ≤10cm
Contact us: